考利茨 County Public Utility District » 十大正规网投排名 » 建筑标准

建筑标准

手风琴的标题

Section 1: Guys and Anchors
Section 2: Transmission Line Construction
  • All Section 2 Standards
  • 2-10 – 115kV Side Post Tangent
  • 2-10DG -钻杆导向
  • 2-10SP -缩短间距
  • 2-11 – 115kV Vertical Post Tangent
  • 2-11DG -钻杆导向
  • 2-12 – 115kV Vertical Post Tangent
  • 2-12DG -钻杆导向
  • 2-20 – 115kV Side Post Light Angle
  • 2-20DG -钻杆导向
  • 2-20SP -缩短间距
  • 2-30 - 115kV侧柱光角双回路
  • 2-30DG -钻杆导向
  • 2-30SP -缩短间距
  • 2-40 – 115kV Vertical Swinging Corner
  • 2-40DG -钻杆导向
  • 2-40SP -缩短间距
  • 2-50 – 115kV Vertical Double Deadend Corner
  • 2-50DG -钻杆导向
  • 2-50SP -缩短间距
  • 2-60 - 115kV带侧柱的垂直双死端
  • 2-60DG -钻杆导向
  • 2-60SP -缩短间距
  • 2-70 – 115kV Horizontal Double Deadend
  • 2-70DG -钻杆导向
  • 2-80 – 115kV Vertical Deadend
  • 2-80DG -钻杆导向
  • 2-80SP -缩短间距
  • 2-90 - 115kV组接开关
  • 2-90DG -钻杆导向
  • 2-90SP -缩短间距
  • 2-100 – 115kV Suspension H-Structure
  • 2-101 - 115kV悬架h型结构，带玻璃纤维横臂
  • 2-110 - 115kV三极双死角切线(横臂以下绝缘子)
  • 2-120 - 115kV三极双双切线(横臂以上绝缘子)
  • 2-130 - 115kV三极双死角(60-90角)
  • 2-140 - 115kV带侧柱的三极双死端(60-90角)
  • 2-150 - 115kV垂直施工换位
  • 2-RSN -缩短间距说明
第三部分:三相主干线建设
  • 所有第3节标准
  • 3-20 -双销复合臂(特重型)
  • 3-21 – Double Pin Composite Arm (Heavy Duty)
  • 3-22 – Double Pin Composite Arm (Tree-Wire)
  • 3-23 -杆上的双引脚5- 11b(超重型)
  • 3-24 – Double Pin 5-11 B on Pole (Heavy Duty)
  • 3-25 – Double Pin 5-11 B on Pole (Tree-Wire)
  • 3-26 - 10英尺双引脚5- 11b接线杆(超重型)
  • 3-26A - 10英尺双引脚5- 11b在臂上(特重型)
  • 3-27 - 10英尺双引脚5- 11b接线杆(重型)
  • 3-27A - 10英尺双引脚5- 11b在臂上(重型)
  • 3-28 - 10英尺双引脚5- 11b接线杆(树线)
  • 3-28A – 10FT Double Pin 5-11 B on Arm (Tree-Wire)
  • 3-30 – Composite Arm Deadend (Extra Heavy Duty)
  • 3-31 – Composite Arm Deadend (Heavy Duty)
  • 3-32 – Composite Arm Deadend (Tree-Wire)
  • 3-33 - 10英尺复合臂挡板(超重型)
  • 3-34 – 10FT Composite Arm Deadend (Heavy Duty)
  • 3-35 – 10FT Composite Arm Deadend (Tree-Wire)
  • 3-40 -复合臂双挡板(超重型)
  • 3-41 -复合臂双挡板(重型)
  • 3-42 – Composite Arm Double Deadend (Tree-Wire)
  • 3-43 - 10英尺复合臂双挡板(超重型)
  • 3-44 - 10英尺复合臂双挡板(重型)
  • 3-45 - 10英尺复合臂双死角(树丝)
  • 3-50 - 8英尺复合巴克挡板(特重型)
  • 3-51 – 8FT Composite Buck Deadend (Heavy Duty)
  • 3-52 – 8FT Composite Buck Deadend (Tree-Wire)
  • 3-53 - 10英尺复合Buck挡板(超重型)
  • 3-54 – 10FT Composite Buck Deadend (Heavy Duty)
  • 3-55 – 10FT Composite Buck Deadend (Tree-Wire)
  • 3-60 – Vertical Corner (Extra Heavy Duty)
  • 3-61 – Vertical Corner (Heavy Duty)
  • 3-70 – Vertical Deadend (Extra Heavy Duty)
  • 3-71 – Vertical Deadend (Heavy Duty)
  • 3-80 -垂直双死角(特重型)
  • 3-81 -垂直双死角(重型)
  • 3-90 -紧凑型直列结构(超重型)
  • 3-91 – Compact Construction In-Line (Heavy Duty)
  • 3-92 – Compact Construction In-Line (Tree-Wire)
  • 3-100 -紧凑结构角1-5°(超重型)
  • 3-101 -紧凑结构角3-10°(重型)
  • 3-102 -紧凑结构角3-8°(树线)
  • 3-110 -紧凑结构角5-8°(超重型)
  • 3-111 -紧凑结构角10-14°(重型)
  • 3-112 -紧凑结构角9-13°(树线)
  • 3-120 -垂直直线柱式绝缘子(特重型)
  • 3-121 -垂直直线柱式绝缘子(重型)
  • 3-122 -垂直直线柱式绝缘子(树线)
  • 3-130 – Alley Arm Single or Double
  • 3-230 – Pole Mounted Primary Metering
  • 3-240 -平台安装初级线路稳压器(219kVA及以下)
  • 3-241 -平台安装初级线路稳压器(416kVA)
  • 3-260 – Capacitor Bank 600 kVAR
  • 3-269 -开关电容器组1500kvar w/浮动中性
  • 3-270 – 15kV Group Operated 900 Amp Switch
  • 3-270WO - 15kV群控900安培开关(w/o控制臂)
  • 3-320 -中继器AMI
  • 3-330 - dde h -框架
  • 3-501 – Tangent, 8ft Wood Arm, 0-1°
  • 3-502 – Light Angle, 8ft Wood Arm, 1-5°
  • 3-503 – BOP Tangent, 8ft Wood Arm, 0-1°
  • 3-504 – BOP Light Angle, 8ft Wood Arm, 1-5°
  • 3-505 – Tangent, 10ft Wood Arm, 0-1°
  • 3-506 – Light Angle, 10ft Wood Arm, 1-5°
  • 3-507 – NOA Tangent, 10ft Wood Arm, 0-5°
  • 3-508 – BOP Tangent, 10ft Wood Arm, 0-1°
  • 3-509 – BOP Light Angle, 10ft Wood Arm, 1-5°
  • 3-510 -正切，无支架8英尺玻璃纤维臂，0-1°
  • 3-511 -正切，无支架10英尺玻璃纤维臂，0-1°
第四部分:v相主干线建设
  • 所有第4节标准
  • 4-10 – Single Arm (Heavy Duty)
  • 4-20 – Double Pin Composite Arm (Heavy Duty)
  • 4-30 – Composite Arm Deadend (Heavy Duty)
  • 4-40 -复合臂双挡板(重型)
  • 4-50 – Composite Arm Buck Deadend (Heavy Duty)
  • 4-60 – Vertical Corner (Heavy Duty)
  • 4-70 – Vertical Deadend (Heavy Duty)
  • 4-80 -垂直双死角(重型)
  • 4-90 - v相立式双挡板(重型)
第5部分:单相主干线建设
  • All Section 5 Standards
  • 5-10 – Single Arm (Heavy Duty – Neutral on Arm)
  • 5-15 -单PH TW SA 0-5(重型-手臂中性)
  • 5-20 -双销复合臂(重型-臂上空挡)
  • 5-25 -单PH TW SA 5-11双引脚(重型-臂上中性)
  • 5-30 -复合臂挡板(重型-臂上无挡板)
  • 5-40 -复合臂双挡板(重型-臂上无挡板)
  • 5-50 -复合臂挡板(重型-臂上无挡板)
  • 5-60 -单极顶销
  • 5-62 – Single PH TW 0-5 Pole Top Pin
  • 5-64 -单个PH 0-3单个玻璃纤维支架(Trans)
  • 5-70 -双极顶销
  • 5-72 – Single PH TW 5-11 Double Pole Top Pin
  • 5-74 -单个ph4 -14单个玻璃纤维支架(Trans)
  • 5-80 – Vertical Corner (Heavy Duty)
  • 5-90 – Vertical Deadend (Heavy Duty)
  • 5-92 -从Twiggy手臂的单一PH垂直死角
  • 5-100 – Vertical Double Deadend (Heavy Duty)
  • 5-102 -单相垂直双死角(树线)
  • 5-110 -垂直双死角(重型)
  • 5-112 -单PH垂直双死角(角落，树线)
  • 5-120 -单PH垂直双Deadend从细枝臂
  • 5-150 -安装单PH线调整杆(219KVA及以下)
  • 5-160 – Single PH 25KV Trip Saver (Recloser)
  • 5-170 -单PH电路保护O/H变压器
  • 5-180 – Single PH Conventional O/H Transformers
Section 6: Three-Phase Underground Primary
Section 7: Single-Phase Underground Primary
  • 所有第7节标准
  • 7-10 – 100 Amp Lightning Arrestor/Cutout Combo
  • 7-40 - 2英寸主立管
  • 7-50 – Single Phase Primary Pedestal
  • 7-80 – Single-Phase Pad-Mounted Transformer
第八部分:次要 & 服务入口
Section 9: OPGW and Fiber Optics
Section 10: Metering Diagrams
  • All Section 10 Standards
  • 10-101 - 100安培单相2线120V(仅现有)
  • 10-102 - 200安培单相三线120/240V或240/480V
  • 10-103 – 320 Amp Single-Phase 3-Wire 120V/240V
  • 10-104 – 200 Amp Single-Phase 3-Wire 120/208V
  • 10-105 – 200 Amp Single-Phase 3-Wire 240/480V
  • 10-106 - 320安培单相3线Delta 240V或480v(仅现有)
  • 10-107 - 200安培三相4线方式120/208V或139/240V或277/480V
  • 10-108 - 200安培三相4线Delta 120/240V或240/480V
  • 10-109 -住宅单座c.T. 单相三线120/240V(仅现有)
  • 10-110 -商用单- c.T. 单相三线120/240V(仅现有)
  • 10-111 ——Dual-C.T. Single-Phase 3-Wire 120/240V
  • 10-113 -商业C.T. Three-Phase 4-Wire Delta 120/240V
  • 10-114 -商业C.T. Three-Phase 4-Wire Wye – 800 Amps Maximum
  • 10-115 -商业C.T. Three-Phase 4-Wire Wye – Over 800 Amps
  • 10-116 -商业C.T. Three-Phase 3-Wire Delta (Existing Only)
  • 10-117 – Primary Metering Single-Phase 2-Wire 7.2 kv地下
  • 10-118 – Primary Metering Single-Phase 2-Wire 7.2 kv架空
  • 10-119 -初级计量三相4线方式.5 kv地下
  • 10-120 -初级计量三相4线方式.5 kv架空
  • 10-121 -主计量三相3线Delta 12.5 kv架空 (Existing Only)
Section 11: Engineering Practices
Section 12: Materials Standards
  • All Section 12 Standards
  • 12-10 – Class 4 Wood Poles (30 and 35-Ft)
  • 12-20 – Class 2 Wood Poles (40-65 Ft)
  • 12-30 – Class H2 Wood Poles (70 and 120-Ft)
  • 12-40 - 8英尺复合横臂光角(5-11度)
  • 12-50 – 8-Ft Composite Double Dead End Crossarm
  • 12-60 – 12-Ft Composite Double Dead End Crossarm
  • 12-70 – Double Pin Insulator Mounting Bracket
  • 12-80 – 8-Ft Wood Heavy Duty Crossarm
  • 12-90 – 8-Ft Wood Extra Heavy Duty Crossarm
  • 12-100 – 10-Ft Wood Distribution Crossarm
  • 12-110 – 10-Ft Composite Light Angle Crossarm
  • 12-120 – 10-Ft Composite DE Crossarm
Section 13: Joint Use Standards
  • All Section 13 Standards
  • 13-01 -杆附件顶置最小间隙
  • 13-02 – Pole Attachments Grounding Connections
  • 13-03 – Pole Attachments Guy Wire Attachments
  • 13-04 -杆附件与服务和道路的最小间隙
  • 13-05 -极附件电路之间的最小间隙
  • 13-06 -杆附件攀爬空间要求
  • 13-07 -通信无线天线附件传输杆
  • 13-08 -通信无线天线附件分配杆
  • 13-09 -通信无线天线附件家伙短杆
  • 13-10 – Pole Attachments PUD Fiber
  • 13-11 -极附件PUD光纤(自支撑DDE)
  • 13-12 -极附件PUD光纤(自支撑跌落)
  • 13-50 – PUD ADSS Fiber – Tangent Clamp Attachment
  • 13-52 - PUD ADSS光纤-双端(0-30度)
  • 13-53 - PUD ADSS光纤-双端(30+度)
  • 13-54 – PUD ADSS Fiber – Single Deadend
  • 13-61 – PUD ADSS Fiber – Slack Storage – In Span
  • 13-63 – PUD ADSS Fiber – Splice Closure – In Span
Standards Technical Notices
  • 02/21/2019 -违反NESC规定的客户自有立管和服务线
  • 06/16/2021 – Transformer Box Pad Use
  • 06/07/2023 – Revisions to O/H Distribution Standards
  • 06/18/2024 – Standard Distribution Pole Sizes
其他图纸
  • 箱板 – Transformer Box Pad Installation
  • 桥梁附件 – Conduit Attachment Guidelines
  • 侧接箍 – Service Lateral Tie-In Guidelines